姓名
|
林福銘
|
學歷
|
成功大學土木系學士,1998
成功大學土木系碩士,2000
成功大學土木系博士,2005
|
E-mail
|
fminglin@itri.org.tw
|
博士論文題目
|
纖維複合疊層材料補強鋼筋混凝土版之數值模擬
|
摘要 |
基於使用FRP補強土木結構物的施工新趨勢,有必要提出一套合理且有效的分析方法,可以準確預測補強後結構物的極限強度與巨觀行為(global
behavior)機制,提供給工程實務上的評估使用。此分析方法,必須能考慮材料真實的非線性行為,並利用現有諸多實驗研究成果來驗證分析模式的正確性。
本文主要的目標是藉由考慮更真實的材料行為,提出較合理的非線性分析模式,利用有限元素軟體ABAQUS來執行此非線性的數值計算,經由與現有的梁、正方形版、單向版等補強實驗資料驗證,確定建議的分析模式可準確預測RC結構物補強後的強度,並根據此模式作參數分析,供工程應用參考。
參數分析的部分,主要以實驗資料較少的雙向版補強為主,討論在受均佈力作用下,補強面積與位置及纖維角度改變時,版之強度變化。最後並提出未來相關領域研究發展之建議。 |
期刊、研討會論文
|
-
Hu, H.-T., Lin, F.-M. and Jan, Y.-Y., "Nonlinear Finite Element
Analysis of Reinforced Concrete Beams Strengthened by Fiber-Reinforced Plastics," Composite Structures, Vol. 63,
No. 3-4, February-March 2004, pp. 271-281 (SCI).
-
Lin, F.-M. and Hu, H.-T., "Strengthening of
Square Reinforced Concrete
Plates with Fiber Reinforced Plastics," the Fourteenth
International Offshore and Polar Engineering Conference, Volume
II, Toulon, France, May 23-28, 2004, pp. 538-544.
-
林福銘、胡宣德,複合材料補強鋼筋混凝土梁與單向版之非線性有限元素分析,電子計算機於土木水利工程應用研討會,2005年9月2日,371-376頁(學生論文競賽佳作獎)。
-
Hu, H.-T., Yang, C.-H. and Lin, F.-M., "Buckling Analyses of Composite Laminate Skew Plates with Material
Nonlinearity," Composites Part B: Engineering, Vol. 37, No.
1, January 2006, pp. 26-36 (SCI).
-
Chen, C.-H., Lin,
F.-M., Hu, H.-T. and Yeh, F.-Y., "Residual Stress and Bow
Analysis for Silicon Solar Cell Induced by Soldering," International
Symposium on Solar Cell Technologies, Taipei, Taiwan, December 5-6,
2008.
-
Hu, H.-T., Lin, F.-M., Liu, H.-T., Huang, Y.-F. and Pan, T.-C., "Constitutive
Modeling of Reinforced Concrete and Prestressed Concrete Structures
Strengthened by Fiber Reinforced Plastics," Composite Structures,
Vol. 92, No. 7, June 2010, pp. 1640-1650 (SCI).
-
Lesmana, C., Hu, H.-T.,
Lin, F.-M. and Huang, N.-M., "Nonlinear Finite Element Analysis of
Square Reinforced Concrete Plates Strengthened by Fiber Reinforced
Plastics," the 20th International Conference on Composites or Nano
Engineering (ICCE-20), Beijing, China, July 22-28, 2012.
-
Lesmana, C., Hu, H.-T.,
Lin, F.-M. and Huang, N.-M., "Numerical Analysis of Square
Reinforced Concrete Plates Strengthened by Fiber-Reinforced Plastics
with Various Patterns," Composites Part B: Engineering, Vol. 55,
December 2013, pp. 247-262 (SCI).
-
陳志宏、胡宣德、林福銘,"矽晶太陽能電池燒結後的翹曲數值模型與幾何參數分析",太陽能及新能源學刊,第十八卷,第一期, 2016年6月,第3-8頁。
-
Chen, C.-H., Hu, H.-T., Lin, F.-M. and Hsieh, H.-H., "Residual Stress Analysis and Bowing Simulation of
Crystalline Silicon Solar Cells," Journal of Zhejiang University - Science A
(Applied Physics & Engineering), Vol.
18, No. 1, January 2017,
pp. 49-58 (SCI).
-
黃靖雅、胡宣德、李永峰、林福銘,"太陽光電模組與夾扣件受機械荷重之有限元素分析",中國土木水利工程學刊,Vol.
31, No. 1,
2019年3月, pp. 119-127 (EI)。
-
林冠宏、胡宣德、李永峰、林福銘、賈維桓、劉政佑,"多電極太陽光電模組受機械荷重之有限元素分析",中國土木水利工程學刊,Vol.
32,No.
6,2020年10月,pp.
493-505 (EI)。
|
現職 |
工業技術研究院,綠能與環境研究所,太陽光電技術組,組長/正研究員 |